Three doors up and down lockers

1. Technological process: find line positioning → frame, rack installation → partition, fulcrum installation → wall (suspension) cabinet fan installation → hardware installation

2. Find the position of the line: before plastering, according to the requirements of the design and construction drawings, according to the height of the wall cabinet and the condole cabinet and the height of the upper and lower mouth, use the indoor unified elevation line, consider the relationship between the plaster thickness and the determination of the corresponding position.

3. Frame and frame installation: the frame and frame of wall cabinet and condole cabinet should be carried out before internal plastering. After being installed in the correct position, two nails and wall tiles are nailed to each side of the frame. Do not expose the hat. If the partition is aerated concrete or lightweight partition, it shall be fixed according to the design requirements of the structure. If you don't need to design, can be drilled in advance Φ 5 mm hole, a depth of 70-100 - mm, advance the wedge rubber 107 slurry embedded in the hole. After the hole is firmly bonded, install the fixed cabinet. When steel cabinets are used, the iron components need to be pre-inserted into the mounting hole to secure the frame and welded to the frame components. When the frame or frame is fixed, it should be corrected, set, straightened, checked, height, size and position are correct before fixing.

4. Installation of partition fulcrum: install partition fulcrum (frame) according to the height position of construction drawing and required fulcrum structure. The fulcrum of the wooden partition is usually nailed to the wooden brick of the wall, and the concrete partition is usually truss iron or corner bracket.