Three mouth conditioning table

Countertop: inside is a 1 inch (25 mm) composite board with high pressure HPL.

The edge of the table is formed by casting flexible polyurethane on the outside, with a width of no less than 30mm.

Unit front :(18mm solid wood particleboard is used internally), high pressure HPL is used on the surface, and hinges must be used to simplify installation.

Width of working face: 450mm-800mm;

The distance from the surface to the ground is 720-750mm, and the bottom adjusting foot can be fine-tuned;

Working face support arm: material strength standard no less than no. 10 cold-rolled steel; The strength of the reinforcement shall not be lower than that of no. 12 cold-rolled steel.

Bottom support: bending stress not less than 110 KSI.

HPL cover: rated thickness: not less than 1.2mm; Thickness error: ±0.12mm or less (including quantity); Wear resistance: no less than 400 cycles.

Upgrade monitor station technical requirements

Most of the main structures of the lifting stations are the same as those of ordinary stations.