Hotel commercial range specifications

Commercial stoves:

Modern commercial stoves include stoves, washbasins and consoles, all located on the same floor. The height and width of the cooktop should be ergonomic, too high or too wide.

Height: height of commercial cooktops shall be between 0.85 m and 0.85 m or between 0.93 m and 1.00 m.

Width: commercial cooktop widths shall be between 0.46m and 0.6m or between 0.56m and 0.63m.

The height and width mentioned here are the finished surface of the cooktop, that is, the net height and net width after completion. Its height should be calculated from the zero height of the floor tile to the water level of the cooktop. Its width is also the distance of the table diameter. If the outer surface of the table is curved, its diameter should not exceed 0.62m, then naturally curved to the distance, its diameter should not be less than 0.49m.

Height of kitchen hearth:

Height of kitchen hearth: the height of cooktop should be between 0.86 m and 0.89 m or between 0.94 m and 1.00 m.

Width of kitchen hearth: the width of furnace plate should be between 0.47m-0.5m or between 0.55m-0.62m.

The height that mentions here and width are the finish processing face of kitchen hearth, namely the net height after finishing and net width. Its height should be calculated from the zero height of the floor tile to the water level of the cooktop. The width is also the widest distance of the table diameter. If the outer surface of the table is curved, its diameter should not exceed 0.62m, then naturally bend the transition to the distance. Diameter should not be less than 0.47 m.

Kitchen hearth size:

The size of the kitchen hearth depends on the size of the cooker. There is no fixed size. Generally, open gas stoves are 595 * 353mm, 371 * 681mm, 671 * 351mm, and 401 * 701mm. It can be determined by the kitchen area. . The size of the opening is determined according to the size of the purchased gas stove. The dimensions of the openings are usually connected to the interior of the furnace.