Bottom tray table

The design of various structural frames conforms to the requirements of ergonomics;

The installation location of the monitoring station equipment and cable management system is specially designed to facilitate the installation, use, adjustment and layout of various cables.

Monitoring table: desktop main board adopts 1 "thick density board, HPL high-pressure wear-resistant fire prevention board (1.2mm) veneer; The soft edge of the table is made of polyurethane, which is ergonomic and can ensure the comfort of the monitoring staff for a long time. ;

Automatic lifting structure: the lower part of the monitoring platform adopts a low-noise motor, which can raise the desktop steadily with the display device;

The motor has a compensation system to prevent stepping movement, and the monitor station elevator has a load of 2500N (550lb or 249.5kg).

Display arm requirements

The display arm shall bear a load of not less than 18 kg and shall be capable of stretching.

The rake Angle is within plus or minus 40 degrees.

The base of the display suspension arm shall be locatable and fixed in any position without the use of tools.

Can meet the single-layer, double-layer display installation requirements, double-layer overlap does not affect the stability of the display installation.